Freecad tutorial - part 01_09 - Getting started | Assembly #002

   With this tutorial, i have covered some part of the assembling in Freecad, but only as first method, i covered some tools, earlier navigation as well. There is a lot more to go thorugh, but i'll go point by point, so to speak.
   Next i'll try to explain Move and Rotate tools, a bit more detailed, since i have just touch them throughout this tutorials so far.
   Tools, by it self, can't do much, but, If they are used wisely, and for sure combined, there is no end to the variety of what those tools can do.

Freecad tutorial - part 01_08 - Getting started | Assembly #001

Assembly tutorials are covered in more than one video, so, the rest of the tutorials will be uploaded in days to come...

Tool covered in this part is "Move", and next will be "Rotate", because of their simplicity i named them as first method.
Then, in Edit menu, Placement and Alignment as second method,
and Assembly2 workbench, as third method. 

Step by step i'll cover most of the things which are important for assembly to work. I'll use pottery wheel parts, modeled in previous video tutorials. Just for a starting point those parts are enough simple to use and cover most of basic (and more) tools and features, as well as some concepts in a workflow.
For example, at this point, there are more ways to assemble some model. And to know one way, or method, it may cost a lot of time, knowing all of them can give the best of our workflow, and to save time, maybe even money...
Knowing more, of course, does not mean that we are going to be more technical in some area, to know how to make things done, but, we need that knowledge so we can create stuff and use workflow more creatively, thus, work will be a lot faster.

Freecad tutorial - part 01_07 - Getting started - Time-saving, Copies

As project can get very complicated, it's not very good idea to speed things up, but, there are methods, of course.
This may not be the perfect example, but it can give some ways or directions for further learning.

Covered in this tutorial:

- Sketch
- Part Design
- Rectangle
- Pocket
- Vertical distance constraint
- Save document

- - - - - - - - - - - - - - - - -

Facebook page: https://www.facebook.com/tutorialfielddesign/
Blog: https://tutorialfield.blogspot.com/
Google+: https://plus.google.com/u/0/113058524294431076401
Twitter: https://twitter.com/TutorialField

- - - - - - - - - - - - - - - - -

FreeCad tutorial - part 01_06 - Getting started

Covered in this tutorial:
- Sketch
- Part Design
- Rectangle
- Pad
- Equality constraint
- Symmetry constraint
- Horizontal distance constraint
- Vertical distance constraint
- Save document

- - - - - - - - - - - - - - - - -

FreeCad tutorial - part 01_05 - Getting started

Covered in this tutorial:
- Sketch
- Part Design
- Rectangle
- Pad
- Pocket
- Equality constraint
- Symmetry constraint
- Horizontal distance constraint
- Vertical distance constraint
- Save document

- - - - - - - - - - - - - - - - -

FreeCad tutorial - part 01_04 - Getting started

Covered in this tutorial:
- Sketch
- Part Design
- Rectangle
- Pad
- Pocket
- Equality constraint
- Symmetry constraint
- Horizontal distance constraint
- Vertical distance constraint

FreeCad tutorial - part 01_03 - Getting started

Wih the progress of making pottery wheel, i'll do my best to cover tools i use, and similar stuff. It is very important for sure, if someone is having problems with the specific part of the program.
I think, it will take a lot of time for me, to make and cover all there is to  cover throughout this tutorials. But, as tutorials go deeper from basics to the concepts which are, in a way, a bit more complicated, i'll take any suggestion, for the specific area i'm in, to cover.

Covered in this tutorial:

- Sketch
- Part Design
- Rectangle
- Pad
- Pocket
- Equality constraint
- Symmetry constraint
- Horizontal distance constraint
- Vertical distance constraint

FreeCad tutorial - part 01_02 - Getting started - Navigation

Wih the progress of making pottery wheel, i'll do my best to cover tools i use, and similar stuff. It is very important for sure, if someone is having problems with the specific part of the program.
I think, it will take a lot of time for me, to make and cover all there is to  cover throughout this tutorials. But, as tutorials go deeper from basics to the concepts which are, in a way, a bit more complicated, i'll take any suggestion, for the specific area i'm in, to cover.

Covered in this tutorial:

1. Selecting
2. Preselection
3. Multiple selection
4. Pan mode
5. Zoom mode
6. Rotate mode
7. Navigating with mouse only

FreeCad tutorial - part 01_01 - Getting started - Intro

Throughout following tutorials i'll cover in depth as many segments, tools, workbenches, concepts and other stuff i am able to cover, as well examples of different objects and products.

For now, in this tutorials of making pottery wheel, i'll mostly cover basics, or stuff to get started. It might be useful for those who are a bit more familiar with Freecad.

If this video is a bit faster for someone to follow, just use pause button, of course, anyone can inform me with this kind of problems, i'll adjust future videos. 

I don't have any specific plan of uploading, every tutorial will be uploaded as soon as it is ready to be published.